NEWS
NEWS
News


Shanghai Bearing Technology

Address: No. 301 Shangxue Road
difference between butyl silicon...
difference between butyl silicon...
2016-11-02 10:06
The insulation of silicon butyl cable is made of thermoplastic plastic, with relatively soft properties. Tensile strength ≥ 12.5mpa, dielectric strength Mv/m≥18, elongation at break ≥300%, thermal stability time ≥50Min at 200℃, impact embrittlement temperature ≥ 25℃, HCI release quantity mg/g no, volume resistivity ≥1*10, thermal deformation ≤60 at 20℃.
Silicone rubber cable radiation resistance, disinfection dose effect is small; Anti-vibration performance, near-constant transmission rate and resonance frequency at -50-65℃; Better air permeability than other polymers; Dielectric strength 500V·km-1; Conductivity < 0.1-15 Ω · cm; To relax or hold together; slack. Ablative temperature 4982℃; Minimal exhaust after proper coordination; Facilitate the application of food filling under food management rules; Flame retardant property; Can be made five color tasteless products; Waterproof property; Non-toxic and physiologically inert medical implants. Silicone rubber cable in practical use, the performance is very stable, which other types of cable can not be compared with, at the same time, its stability is very good, people in the use of the process will not easily appear problems, which may be the former does not have.
Previous :
reason of cable aging is analyzed
Copyright © Shanghai Machinery Industry Bearing Product Quality Testing Center Power by 300.cn 沪ICP备16002259号